Euronorm Standard List - Structural and Constructional Steels Standards: Part One

خلاصات:

The creation of the EEC (European Economic Community) has made it necessary to establish common standards named "European Norms" (EN), therefore standardizing the common language across Europe. Since 1988 a new series of 'mandatory' European standards (EN) has been created, to replace national standards, such as BS, DIN, SS and NF, throughout 18 countries of Western Europe.

The European (EN) standards include of specifications for delivery conditions, properties, quality, dimensions and definitions of all products, raw materials and processes of the iron and steel industry. Among others, Euronorm standards cover a large variety of structural and constructional steels, from hot and cold rolled steels, plates, sheets and strips, heat treatable steels, castings, stainless and heat resisting steels, electrical steels etc.

For more information on the EN designation system see Introduction to the Euronorm Standard Designation System.

The table below provides a part of the most important Euronorm standards for structural and constructional steels.

For further examples of Structural and Constructional Steel Standards see Euronorm Structural and Constructional Steels: Part Two.

The list of standards below cover among other things:

Standard
Number
Last
version
Description Status
EN 10016-1 1994 Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirements  
EN 10016-2 1995 Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod  
EN 10016-3 1995 Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod  
EN 10016-4 1995 Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications  
EN 10017 2004 Steel rod for drawing and/or cold rolling - Dimensions and tolerances  
EN 10020 2000 Definition and classification of grades of steel  
EN 10021 2006 General technical delivery conditions for steel products  
EN 10024 1995 Hot rolled taper flange I sections - Tolerances on shape and dimensions  
EN 10025 1993 Hot rolled products of non-alloy structural steels; technical delivery conditions Replaced by EN 10025-1/2004; 10025-2/2004
EN 10025-1 2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions  
EN 10025-2 2004 Hot rolled products of structural steels - Part 2: Technical delivery conditions for non-alloy structural steels  
EN 10025-3 2004 Hot rolled products of structural steels - Part 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steels  
EN 10025-4 2004 Hot rolled products of structural steels - Part 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steels  
EN 10025-5 2004 Hot rolled products of structural steels - Part 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistance  
EN 10025-6 2004 Hot rolled products of structural steels - Part 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered condition  
EN 10028-1 2007 Flat products made of steels for pressure purposes - Part 1: General requirements  
EN 10028-2 2009 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties  
EN 10028-3 2009 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized  
EN 10028-4 2009 Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties  
EN 10028-5 2009 Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled  
EN 10028-6 2009 Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered  
EN 10028-7 2007 Flat products made of steels for pressure purposes - Part 7: Stainless steels  
EN 10029 1991 Hot rolled steel plates 3 mm thick or above - Tolerances on dimensions, shape and mass  
EN 10031 2003 Semi-finished products for forging - Tolerances on dimensions shape and mass  
EN 10034 1993 Structural steel I and H sections - Tolerances on shape and dimensions  
EN 10048 1996 Hot rolled narrow steel strip - Tolerances on dimensions and shape  
EN 10051 1997 Continuously hot-rolled uncoated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape  
EN 10055 1995 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions  
EN 10056-1 1998 Structural steel equal and unequal leg angles - Part 1: Dimensions  
EN 10056-2 1993 Structural steel equal and unequal leg angles - Part 2: Tolerances on shape and dimensions  
EN 10058 2003 Hot rolled flat steel bars for general purposes - Dimensions and tolerances on shape and dimensions  
EN 10059 2003 Hot rolled square steel bars for general purposes - Dimensions and tolerances on shape and dimensions  
EN 10060 2003 Hot rolled round steel bars for general purposes - Dimensions and tolerances on shape and dimensions  
EN 10061 2003 Hot rolled hexagon steel bars for general purposes - Dimensions and tolerances on shape and dimensions  
EN 10067 1996 Hot rolled bulb flats - Dimensions and tolerances on shape, dimensions and mass  
EN 10080 2005 Steel for the reinforcement of concrete - Weldable reinforcing steel – General  
EN 10083-1 2006 Steels for quenching and tempering - Part 1: General technical delivery conditions  
EN 10083-2 2006 Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels  
EN 10083-3 2006 Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels  
EN 10084 2008 Case hardening steels - Technical delivery conditions  
EN 10085 2001 Nitriding steels - Technical delivery conditions  
EN 10087 1998 Free-cutting steels - Technical delivery conditions for semi-finished products, hot-rolled bars and rods  
EN 10089 2002 Hot-rolled steels for quenched and tempered springs - Technical delivery conditions  
EN 10090 1998 Valve steels and alloys for internal combustion engines  
EN 10092-1 2003 Hot rolled spring steel flat bars - Part 1: Flat bars - Dimensions and tolerances on shape and dimensions  
EN 10092-2 2003 Hot rolled spring steel flat bars - Part 2: Ribbed and grooved spring leaves - Dimensions and tolerances on shape and dimensions  
EN 10108 2004 Round steel rod for cold heading and cold extrusion - Dimensions and tolerances  
EN 10111 2008 Continuously hot-rolled low carbon steel sheet and strip for cold forming - Technical delivery conditions  
EN 10113-2 1993 Hot-rolled products in weldable fine grain structural steels - Part 2: delivery conditions for normalized rolled steels Replaced by EN 10025-1:2004; EN 10025-3:2004
EN 10113-3 1993 Hot-rolled products in weldable fine grain structural steels - Part 3: delivery conditions for thermomechanically rolled steels Replaced by EN 10025-1:2004; EN 10025-4:2004
EN 10120 2008 Steel sheet and strip for welded gas cylinders  
EN 10130 2006 Cold rolled low carbon steel flat products for cold forming - Technical delivery conditions  
EN 10131 2006 Cold rolled uncoated and zinc or zinc-nickel electrolytically coated low carbon and high yield strength steel flat products for cold forming - Tolerances on dimensions and shape  
EN 10132-1 2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 1: General  
EN 10132-2 2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 2: Case hardening steels  
EN 10132-3 2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 3: Steels for quenching and tempering  
EN 10132-4 2000 Cold rolled narrow steel strip for heat treatment - Technical delivery conditions - Part 4: Spring steels and other applications  
EN 10137-2 1995 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels Replaced by EN 10025-1:2004; EN 10025-6:2004
EN 10137-3 1995 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels Withdrawn 2000
EN 10139 1997 Cold rolled uncoated mild steel narrow strip for cold forming - Technical delivery conditions  
EN 10140 2006 Cold rolled narrow steel strip - Tolerances on dimensions and shape  
EN 10149-1 1995 Hot-rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions  
EN 10149-2 1995 Hot-rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels  
EN 10149-3 1995 Hot-rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels  
EN 10155 1993 Structural steels with improved atmospheric corrosion resistance - Technical delivery conditions Replaced by EN 10025-5:2004
EN 10162 2003 Cold rolled steel sections - Technical delivery conditions - Dimensional and cross-sectional tolerances  
EN 10163-1 2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 1: General requirements  
EN 10163-2 2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats  
EN 10163-3 2004 Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 3: Sections  
EN 10164 2004 Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions  
EN 10168 2004 Steel products - Inspection documents - List of information and description  
EN 10207 2005 Steels for simple pressure vessels - Technical delivery requirements for plates, strips and bars  
EN 10208-1 2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 1: Pipes of requirement class A  
EN 10208-2 2009 Steel pipes for pipelines for combustible fluids - Technical delivery conditions - Part 2: Pipes of requirement class B  
EN 10209 1996 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions  
EN 10210-1 2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery conditions  
EN 10210-2 2006 Hot finished structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional properties  

ابحث في قاعدة معلومات

ادخل عبارة لتبحث عنها:

بحث بِـ:

الوثيقة الكاملة
الكلمات المفاتيح

ترويسات
خلاصات

This article belongs to a series of articles. You can click the links below to read more on this topic.

With Total Materia finding information about a metal standard specification, its current status and the materials it defines is one click away.

Within seconds it is also possible for you to find related detailed material property data or search equivalent materials starting from the Total Materia standard list.

To get started, click on the standard list button in the menu bar.


By simply selecting a Standard Development Organization (SDO) and/or typing the standard number, you receive immediate results from the multi-lingual database containing over 30,000 standards.

For example, you can review all metal standards from EN by selecting this SDO from the popup.


The result list consists of over 1000 EN metal standards. Information includes: standard description, year of last issue, current status (valid, replaced, etc.) and a hot link to the materials defined by this standard.


By simply clicking the materials hot link, you can see a list of metal materials defined by the selected standard.


From the list of materials, you can review detailed properties and equivalents of each material.


For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.