European standards for metalic materials

Abstract:

In the table of European standards for metallic materials, specifications for seamless and welded steel pipes and pipes products, wire and wire products, forgings, sheets, strips and definition of steel products are presented.

EN 1369 1996 - 09 Founding; magnetic particle inspection
EN 1370 1996 - 09 Founding; surface roughness inspection by visualtactile comparators
EN 1371-1 1994 - 02 Founding; liquid penetrant inspection; part 1: sand, gravity die and low pressure die castings
EN 1559-1 1994 - 08 Founding - Technical conditions of delivery - Part 1: General
EN 1559-2 1995 - 09 Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
EN 1559-3 1994 - 08 Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
EN 1559-5 1995 - 03 Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings
EN 1560 1994 - 08 Founding - Designation system for cast iron - Material symbols and material numbers
EN 1561 1994 - 08 Founding - Grey cast irons
EN 1562 1994 - 08 Founding - Malleable cast irons
EN 1563 1994 - 08 Founding - Spheroidal graphite cast irons
EN 1564 1994 - 08 Founding - Austempered ductile cast irons
EN 12454 1996 - 12 Founding - Visual examination of surface disccontinuities - Steel and castings
EN 10001 1990 - 07 Definition and classification of pig - irons
EN 10016 - 1 1994 - 12 Non - alloy steel rod for drawing and/or cold rolling - Part 1: General requirements
EN 10016 - 2 1994 - 12 Non - alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod
EN 10016 - 3 1994 - 12 Non - alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod
EN 10016 - 4 1994 12 Non - alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications
EN 10020 1995 - 12 Definition and classification of grades of steel
EN 10020 / AC 1996 - 08 Determination and classification of grades of steel; amendment to EN 10020: 1988
EN 10021 1996 - 01 General technical delivery requirements for steel and iron products
EN 10024 1996 - 08 Hot rolled taper flange I sections - Tolerances on shape and dimensions
EN 10025 1996 - 08 Hot rolled products of non -alloy structural steels; technical delivery conditions ( includes amendment A1: 1993)
EN 10027 - 1 1995 - 12 Designation systems for steels; part 1: steel names, principal symbols
EN 10027 - 2 1995 - 12 Designation systems for steels; part 2: numerical system
ECISS/IC 10 1995 - 12 Designation systems for steel: Additional symbols for steel names
EN 10028 - 1 1996 - 08 Flat products made of steels for pressure purposes; part 1: general requirements
EN 10028 - 2 1996 - 08 Flat products made of steels for pressure purposes; part 2: non - alloy and alloy steels with specified elevated temperature properties
EN 10028 - 3 1992 - 12 Flat products made of steels for pressure purposes; part 3: weldable fine grain steels, normalized
EN 10028 - 4 1994 - 09 Flat products made of steels for pressure purposes; part 4: Nickel alloy steels with specified low temperature properties
EN 10028 - 5 1993 - 10 Flat products made of steels for pressure purposes; part 5: weldable fine grain steels, thermomechanically rolled
EN 10028 - 6 1993 - 10 Flat products made of steels for pressure purposes; part 6: weldable fine grain steels, quenched and tempered
EN 10029 1996 - 08 Hot rolled steel plates 3 mm thick or above; tolerances on dimensions, shape and mass
EN 10029/AC 1996 - 08 Hot rolled steel plates 3 mm thick or above; tolerances on dimensions, shape and mass
EN 10034 1993 - 09 Structural steel I and H sections; tolerances on shape and dimensions
EN 10048 1995 - 06 Hot rolled narrow steel strip - Tolerances on dimensions and shape
EN 10051 1991 - 12 Continuously hot - rolled uncoated plate, sheet and strip of non - alloy and alloy steels; tolerances on dimensions and shape
EN 10051/A1 1995 - 09 Continuously hot - rolled uncoated plate, sheet and strip of non - alloy and alloy steels; tolerances on dimensions and shape
EN 10052 1996 - 08 Vocabulary of heat treatment terms for ferrous products
EN 10055 1995 - 11 Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
EN 10056 1991 - 03 Structural steel equal and unequal leg angles; tolerances on shape and dimensions
EN 10056 - 1 1994 - 11 Structural steel equal and unequal leg angles - Part 1: Dimensions
EN 10056 - 2 1993 - 09 Structural steel equal and unequal leg angles; part 2: tolerances on shape and dimensions
EN 10067 1992 - 08 Hot rolled bulb flats; dimensions and tolerances on shape and dimensions
EN 10079 1995 - 12 Definition of steel products
ENV 10080 1995 - 04 Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric
EN 10083 - 1 1996 - 08 Quenched and tempered steels; part 1: technical delivery conditions for special steels
EN 10083 - 1/A1 1995 - 03 Quenched and tempered steels - Part 1: Technical delivery conditions for special steels
EN 10083 - 2 1991 - 02 Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels
EN 10083 - 2/A1 1995 - 03 Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels
EN 10083 - 3 1995 - 09 Quenched and tempered steels - Part 3: Technical delivery conditions for boron steels
EN 10084EN 10087 1995 - 021995 - 04 Case hardening steels - Technical delivery conditionsFree - cutting steels - Technical delivery conditions for semi - finished products, hot rolled bars and rods
EN 10088 - 1 1995 - 04 Stainless steels - Part 1: List of stainless steels
EN 10088 - 2 1995 - 04 Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes
EN 10088 - 3 1995 - 04 Stainless steels - Part 3: Technical delivery conditions for semi - finished products, bars, rods and sections for general purposes
EN 10095 1996 - 02 Heat - resisting steels and alloys
EN 10106 1995 - 12 Cold rolled non - oriented electrical steel sheet and strip delivered in fully processed state
EN 10107 1995 - 12 Grain - oriented electrical steel sheet and strip delivered in fully processed state
EN 10111 1993 - 06 Continuously hot-rolled low carbon steel sheet and strip for cold bending; technical delivery conditions
EN 10113 - 1 1993 - 03 Hot-rolled products in weldable fine grain structural steels; part 1: general delivery conditions
EN 10113 - 2 1993 - 03 Hot-rolled products in weldable fine grain structural steels; part 2: delivery conditions for normalized/normalized rolled steels
EN 10113 - 3 1993 - 03 Hot-rolled products in weldable fine grain structural steels; part 3: delivery conditions for thermomechanical rolled steels
EN 10120 1994 - 06 Steel sheet and strip for welded gas cylinders
EN 10126 1995 - 12 Cold rolled electrical non-alloyed steel sheet and strip delivered in semi-processed state
EN 10130 1991 - 03 Cold rolled low carbon steel flat products for cold forming; technical delivery conditions
EN 10130/A1 1995 - 03 Cold rolled low carbon steel flat products for cold forming; -Technical delivery conditions
EN 10137 - 2 1995 - 09 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels
EN 10131 1991 - 11 Cold rolled uncoated low carbon high yield strength steel flat products for cold forming;tolerances on dimensions and shape
EN 10137 - 1 1995 - 09 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions
EN 10137 - 2 1995 - 09 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels
EN 10137 - 3 1995 - 09 Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels
EN 10138 - 1 1991 - 11 Prestressing steels; part 1: general requirements
EN 10138 - 2 1991 - 11 Prestressing steels; part 2: stress relieved cold drawn wire
EN 10138 - 3 1991 - 11 Prestressing steels; part 3: strand
EN 10138 - 4 1991 - 11 Prestressing steels; part 4: hot rolled and processed bars
EN 10138 - 5 1991 - 11 Prestressing steels; part 5: quenched and tempered wire
EN 10139 1992 - 10 Cold rolled uncoated mild steel narrow strip for cold forming; technical delivery conditions
EN 10140 1992 - 10 Cold rolled narrow steel strip; tolerances on dimensions and shape
EN 10142 1996 - 08 Continously hot-dip zinc coated low carbon steel sheet and strip for cold forming; technical delivery conditions
EN 10143 1993 - 01 Continously hot-dip metal coated steel sheet and strip; tolerances on dimensions and shape
EN 10147 1991 - 11 Continously hot-dip zinc coated unalloyed structural steel sheet and strip; technical delivery conditions
EN 10147/A1 1995 - 06 Continously hot-dip zinc coated structural steel strip and sheet - Technical delivery conditions; Amendment A1
EN 10149 - 1 1995 - 09 Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions
EN 10149 - 2 1995 - 09 Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels
EN 10149 - 3 1995 - 09 Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels
EN 10152 1993 - 10 Electrolytically zinc coated cold rolled steel flat products; technical delivery conditions
EN 10154 1995 - 10 Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions
EN 10155 1993 - 06 Structural steels with improved atmospheric corrosion resistance; technical delivery conditions
EN 10163 - 1 1991 - 08 Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 1: general requirements
EN 10163 - 2 1991 - 08 Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 2: plate and wide flats
EN 10163 - 3 1991 - 08 Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 3: sections
EN 10163 - 4 1991 - 09 Delivery requirements for surface quality of hot rolled steel products; part 4: round bars and wire rod
EN 10164 1993 - 06 Steel products with improved deformation properties perpendicular of the product; technical delivery conditions
EN 10165 1995 - 12 Cold rolled electrical alloyed steel sheet and strip delivered in semi - processed state
EN 10169 - 1 1995 - 08 Continuously organic coated steel flat products - Part 1: General information (definitions, materials, tolerances, test methods )
EN 10169 - 2 1995 - 10 Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
EN 10173 1987 - 03 Double cold reduced electrolytic chromium/chromium oxide coated steel; coil for subsequent cutting into sheets
EN 10202 1996 - 08 Cold reduced electrolytic chromium/chromium oxide coated steel
EN 10203 1991 - 08 Cold reduced electrolytic tinplate
EN 10204 1996 - 01 Metallic products; types of inspection documents
EN 10204/A1 1996 - 01 Metallic products-Types of inspection documents; Amendment A1
EN 10205 1991 - 11 Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel
EN 10207 1991 - 11 Steels for simple pressure vessels; technical delivery requirements for plates, strips and bars
EN 10208 - 1 1992 - 11 Steel pipes for pipe lines for combustible fluids; technical delivery conditions; part 1: pipes of requirement class A
EN 10208 - 2 1996 - 09 Steel pipes for pipe lines for combustible fluids; technical delivery conditions; part 2: pipes of requirement class B
EN 10209 1996 - 10 Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
EN 10210 - 1 1994 - 03 Hot finished structural hollow sections of non - alloy and fine grain structural steels; part 1: technical delivery requirements
EN 10210 - 2 1992 - 09 Hot finished structural hollow sections of non - alloy and fine grain structural steels; part 2: tolerances, dimension and sectional properties
EN 10213 - 1 1995 - 12 Technical delivery conditions for steel castings for pressure purposes - Part 1: General
EN 10213 - 2 1995 - 12 Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures
EN 10213 - 3 1995 - 12 Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures
EN 10213 - 4 1995 - 12 Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic - ferritic steel grades
EN 10214 1995 - 02 Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions
EN 10215 1995 - 02 Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions
EN 10216-1 1995 - 11 Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: non-alloy steel with specified room temperature properties
EN 10217 - 1 1991 - 02 Welded steel tubes for pressure purposes; technical delivery conditions; part 1: non -alloy steel with specified room temperature properties
EN 10218 - 1EN 10218 - 2 1994 - 031995 - 11 Steel wire and wire products; general; part 1: test methodsSteel wire and wire products; general; part 2: wire dimensions and tolerances
EN 10219 - 1 1992 - 09 Cold formed structural hollow sections of non-alloy and fine grain structural steels; part 1: technical delivery requirements
EN 10219 - 2 1992 - 09 Cold formed structural hollow sections of non-alloy and fine grain structural steels; part 2: tolerances, dimensions and sectional properties
ENV 10220 1993 - 11 Seamless and welded steel tubes; dimensions and masses per unit length
EN 10221 1995 - 11 Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
EN 10222 - 1 1994 - 06 Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
EN 10222 - 3 1994 - 06 Steel forgings for pressure purposes - Part 3: Ferritic and martensitic steels with elevated temperature properties
EN 10222 - 4 1994 - 06 Steel forgings for pressure purposes - Part 4: Nickel steels with specified low temperature properties
EN 10222 - 5 1994 - 06 Steel forgings for pressure purposes - Part 5: Fine grain steels with high proof stress
EN 10222 - 6 1994 - 06 Steel forgings for pressure purposes - Part 6: Austenitic, martensitic and austenitic-ferritic stainless steels
EN 10223 - 1 1993 - 02 Steel wire and wire products for fences; part 1: zinc and zinc-alloy coated steel barbed wire
EN 10223 - 2 1993 - 04 Steel wire and wire products for fences; part 2: hexagonal steel wire netting for agricultural, insulation, and fencing purposes
EN 10223 - 3 1993 - 04 Steel wire and wire products for fences; part 3: hexagonal steel wire netting for engineering purposes
EN 10223 - 4 1994 -10 Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing
EN 10223 - 5 1994 -10 Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted joint stock fencing
EN 10223 - 6 1994 -10 Steel wire and wire products for fences - Part 6: Steel wire chain link fencing
EN 10224 1995 - 05 Steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption
EN 10225 1994 - 10 Weldable structural steels for fixed offshore structures
EN 10226 - 1 1995 -11 Pipe threads where pressure tight joints are made on the threads - Part 1: Designation, dimensions and tolerances
EN 10229 1995 - 08 Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
EN 10230 1993 - 02 Steel wire and wire products; common, special and loose feed stock steel wire machine nails
EN 10238 1995 - 12 Automatically blast cleaned and primed steel products
EN 10240 1994 - 06 Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings
EN 10241 1994 - 06 Threaded steel fittings
EN 10242 1994 - 11 Threaded pipe fitting in malleable cast iron
EN 10243 - 1 1995 - 08 Steel drop and press forgings - Tolerances on dimensions
EN 10243 - 2 1995 - 08 Steel upset forgings made on horizontal forging machines -Tolerances on dimensions
EN 10244 - 1 1995 - 01 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles
EN 10244 - 2 1995 - 01 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings on steel wire
EN 10244 - 3 1995 - 01 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings
EN 10244 - 4 1995 - 01 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings
EN 10244 - 5 1995 - 01 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings
EN 10244 - 6 1995 - 01 Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings
EN 10245 - 1 1995 - 01 Steel wire and wire products - Organic coatings on wire -Part 1: General rules
EN 10245 - 2 1995 - 01 Steel wire and wire products - Organic coatings on wire -Part 2: PVC coated wire
EN 10245 - 3 1995 - 01 Steel wire and wire products - Organic coatings on wire -Part 3: PE coated wire
EN 10248 - 1 1995 - 06 Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 10248 - 2 1995 - 06 Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
EN 10249 - 1 1995 - 06 Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions
EN 10249 - 2 1995 - 06 Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
EN 10253 - 1 1994 - 01 Butt; welding pipe fittings wrought carbon steel without specific inspection requirements
EN 10254 1995 - 08 Steel closed die forgings - General technical delivery conditions
EN 10255 1996 - 01 Non-alloy steel tubes suitable for welding or threading
EN 10257 - 1 1994 - 11 Zinc or zinc alloy coated low carbon steel wire for armouring cables - Part 1: Land cables
EN 10257 - 2 1994 - 11 Zinc or zinc alloy coated low carbon steel wire for armouring cables - Part 2: Submarine cables
EN 10267 1995 - 08 Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
EN 10268 1995 - 10 Cold-rolled flat products made of high field strength steels for cold forming - General delivery conditions
EN 10271 1996 - 03 Electrolyticaly zinc-nickel (ZN) coated cold roled steel flat products - Tehnical delvery conditions
EN 10283 1996 - 04 Corrosion resistant steel casting
EN 10284 1996 - 04 Malleable cast iron fittings with commresion ends for plastics piping system
EN 10285 1996 - 12 Steel tubes and fittings for on and offshore pipelines - External three layer extruded polyethylene based coating
EN 10286 1996 - 12 Steel tubes and fittings for on and offshore pipelines - External three layer extruded polypropylene based coatings
EN 10287 1996 - 12 Steel tubes and fittings for on and offshore pipelines - External fused polyethylene based coatings
EN 10288 1997 - 01 Steel tubes and fittings for on and offshore pipelines - External two layer extruded polyethylene based coatings
EN 20049 - 01 1991 - 12 Melleable cast iron threaded pipe fittings; part 1: fittings with parallel internal and taper external threads in accordance with ISO 7-1
EN 29658 1991 - 12 Steel; determination of aluminium content; flame atomic absorption spectrometric method (ISO 9658 :1990)
EN ISO 945 1994 - 07 Cast iron - Designation of microstructure of graphite (ISO 945 : 1975)
EN ISO 1127 1995 - 10 Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length
EN ISO 3785 1995 - 01 Steel - Designation of test piece axes (ISO 3785 : 1976)
EN ISO 8434 - 1 1995 - 05 Metallic tube connections for fluid power and general use - Part 1: 24 < Grad > compression fittings (ISO 8434-1:1994)
EN ISO 10380 1995 - 05 Corrugated flexible metallic hose and hose assemblies (ISO 10380 : 1994)

With Total Materia finding information about a metal standard specification, its current status and the materials it defines is one click away.

Within seconds it is also possible for you to find related detailed material property data or search equivalent materials starting from the Total Materia standard list.

To get started, click on the standard list button in the menu bar.


By simply selecting a Standard Development Organization (SDO) and/or typing the standard number, you receive immediate results from the multi-lingual database containing over 30,000 standards.

For example, you can review all metal standards from EN by selecting this SDO from the popup.


The result list consists of over 1000 EN metal standards. Information includes: standard description, year of last issue, current status (valid, replaced, etc.) and a hot link to the materials defined by this standard.


By simply clicking the materials hot link, you can see a list of metal materials defined by the selected standard.


From the list of materials, you can review detailed properties and equivalents of each material.


For you’re a chance to take a test drive of the Total Materia database, we invite you to join a community of over 150,000 registered users through the Total Materia Free Demo.