EN 1369
|
1996 - 09
|
Founding; magnetic particle inspection
|
EN 1370
|
1996 - 09
|
Founding; surface roughness inspection by visualtactile comparators
|
EN 1371-1
|
1994 - 02
|
Founding; liquid penetrant inspection; part 1: sand, gravity die and low pressure die castings
|
EN 1559-1
|
1994 - 08
|
Founding - Technical conditions of delivery - Part 1: General
|
EN 1559-2
|
1995 - 09
|
Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings
|
EN 1559-3
|
1994 - 08
|
Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings
|
EN 1559-5
|
1995 - 03
|
Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings
|
EN 1560
|
1994 - 08
|
Founding - Designation system for cast iron - Material symbols and material numbers
|
EN 1561
|
1994 - 08
|
Founding - Grey cast irons
|
EN 1562
|
1994 - 08
|
Founding - Malleable cast irons
|
EN 1563
|
1994 - 08
|
Founding - Spheroidal graphite cast irons
|
EN 1564
|
1994 - 08
|
Founding - Austempered ductile cast irons
|
EN 12454
|
1996 - 12
|
Founding - Visual examination of surface disccontinuities - Steel and castings
|
EN 10001
|
1990 - 07
|
Definition and classification of pig - irons
|
EN 10016 - 1
|
1994 - 12
|
Non - alloy steel rod for drawing and/or cold rolling - Part 1: General requirements
|
EN 10016 - 2
|
1994 - 12
|
Non - alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rod
|
EN 10016 - 3
|
1994 - 12
|
Non - alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rod
|
EN 10016 - 4
|
1994 12
|
Non - alloy steel rod for drawing and/or cold rolling - Part 4: Specific requirements for rod for special applications
|
EN 10020
|
1995 - 12
|
Definition and classification of grades of steel
|
EN 10020 / AC
|
1996 - 08
|
Determination and classification of grades of steel; amendment to EN 10020: 1988
|
EN 10021
|
1996 - 01
|
General technical delivery requirements for steel and iron products
|
EN 10024
|
1996 - 08
|
Hot rolled taper flange I sections - Tolerances on shape and dimensions
|
EN 10025
|
1996 - 08
|
Hot rolled products of non -alloy structural steels; technical delivery conditions ( includes amendment A1: 1993)
|
EN 10027 - 1
|
1995 - 12
|
Designation systems for steels; part 1: steel names, principal symbols
|
EN 10027 - 2
|
1995 - 12
|
Designation systems for steels; part 2: numerical system
|
ECISS/IC 10
|
1995 - 12
|
Designation systems for steel: Additional symbols for steel names
|
EN 10028 - 1
|
1996 - 08
|
Flat products made of steels for pressure purposes; part 1: general requirements
|
EN 10028 - 2
|
1996 - 08
|
Flat products made of steels for pressure purposes; part 2: non - alloy and alloy steels with specified elevated temperature properties
|
EN 10028 - 3
|
1992 - 12
|
Flat products made of steels for pressure purposes; part 3: weldable fine grain steels, normalized
|
EN 10028 - 4
|
1994 - 09
|
Flat products made of steels for pressure purposes; part 4: Nickel alloy steels with specified low temperature properties
|
EN 10028 - 5
|
1993 - 10
|
Flat products made of steels for pressure purposes; part 5: weldable fine grain steels, thermomechanically rolled
|
EN 10028 - 6
|
1993 - 10
|
Flat products made of steels for pressure purposes; part 6: weldable fine grain steels, quenched and tempered
|
EN 10029
|
1996 - 08
|
Hot rolled steel plates 3 mm thick or above; tolerances on dimensions, shape and mass
|
EN 10029/AC
|
1996 - 08
|
Hot rolled steel plates 3 mm thick or above; tolerances on dimensions, shape and mass
|
EN 10034
|
1993 - 09
|
Structural steel I and H sections; tolerances on shape and dimensions
|
EN 10048
|
1995 - 06
|
Hot rolled narrow steel strip - Tolerances on dimensions and shape
|
EN 10051
|
1991 - 12
|
Continuously hot - rolled uncoated plate, sheet and strip of non - alloy and alloy steels; tolerances on dimensions and shape
|
EN 10051/A1
|
1995 - 09
|
Continuously hot - rolled uncoated plate, sheet and strip of non - alloy and alloy steels; tolerances on dimensions and shape
|
EN 10052
|
1996 - 08
|
Vocabulary of heat treatment terms for ferrous products
|
EN 10055
|
1995 - 11
|
Hot rolled steel equal flange tees with radiused root and toes - Dimensions and tolerances on shape and dimensions
|
EN 10056
|
1991 - 03
|
Structural steel equal and unequal leg angles; tolerances on shape and dimensions
|
EN 10056 - 1
|
1994 - 11
|
Structural steel equal and unequal leg angles - Part 1: Dimensions
|
EN 10056 - 2
|
1993 - 09
|
Structural steel equal and unequal leg angles; part 2: tolerances on shape and dimensions
|
EN 10067
|
1992 - 08
|
Hot rolled bulb flats; dimensions and tolerances on shape and dimensions
|
EN 10079
|
1995 - 12
|
Definition of steel products
|
ENV 10080
|
1995 - 04
|
Steel for the reinforcement of concrete - Weldable ribbed reinforcing steel B 500 - Technical delivery conditions for bars, coils and welded fabric
|
EN 10083 - 1
|
1996 - 08
|
Quenched and tempered steels; part 1: technical delivery conditions for special steels
|
EN 10083 - 1/A1
|
1995 - 03
|
Quenched and tempered steels - Part 1: Technical delivery conditions for special steels
|
EN 10083 - 2
|
1991 - 02
|
Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels
|
EN 10083 - 2/A1
|
1995 - 03
|
Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels
|
EN 10083 - 3
|
1995 - 09
|
Quenched and tempered steels - Part 3: Technical delivery conditions for boron steels
|
EN 10084EN 10087
|
1995 - 021995 - 04
|
Case hardening steels - Technical delivery conditionsFree - cutting steels - Technical delivery conditions for semi - finished products, hot rolled bars and rods
|
EN 10088 - 1
|
1995 - 04
|
Stainless steels - Part 1: List of stainless steels
|
EN 10088 - 2
|
1995 - 04
|
Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip for general purposes
|
EN 10088 - 3
|
1995 - 04
|
Stainless steels - Part 3: Technical delivery conditions for semi - finished products, bars, rods and sections for general purposes
|
EN 10095
|
1996 - 02
|
Heat - resisting steels and alloys
|
EN 10106
|
1995 - 12
|
Cold rolled non - oriented electrical steel sheet and strip delivered in fully processed state
|
EN 10107
|
1995 - 12
|
Grain - oriented electrical steel sheet and strip delivered in fully processed state
|
EN 10111
|
1993 - 06
|
Continuously hot-rolled low carbon steel sheet and strip for cold bending; technical delivery conditions
|
EN 10113 - 1
|
1993 - 03
|
Hot-rolled products in weldable fine grain structural steels; part 1: general delivery conditions
|
EN 10113 - 2
|
1993 - 03
|
Hot-rolled products in weldable fine grain structural steels; part 2: delivery conditions for normalized/normalized rolled steels
|
EN 10113 - 3
|
1993 - 03
|
Hot-rolled products in weldable fine grain structural steels; part 3: delivery conditions for thermomechanical rolled steels
|
EN 10120
|
1994 - 06
|
Steel sheet and strip for welded gas cylinders
|
EN 10126
|
1995 - 12
|
Cold rolled electrical non-alloyed steel sheet and strip delivered in semi-processed state
|
EN 10130
|
1991 - 03
|
Cold rolled low carbon steel flat products for cold forming; technical delivery conditions
|
EN 10130/A1
|
1995 - 03
|
Cold rolled low carbon steel flat products for cold forming; -Technical delivery conditions
|
EN 10137 - 2
|
1995 - 09
|
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels
|
EN 10131
|
1991 - 11
|
Cold rolled uncoated low carbon high yield strength steel flat products for cold forming;tolerances on dimensions and shape
|
EN 10137 - 1
|
1995 - 09
|
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 1: General delivery conditions
|
EN 10137 - 2
|
1995 - 09
|
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 2: Delivery conditions for quenched and tempered steels
|
EN 10137 - 3
|
1995 - 09
|
Plates and wide flats made of high yield strength structural steels in the quenched and tempered or precipitation hardened conditions - Part 3: Delivery conditions for precipitation hardened steels
|
EN 10138 - 1
|
1991 - 11
|
Prestressing steels; part 1: general requirements
|
EN 10138 - 2
|
1991 - 11
|
Prestressing steels; part 2: stress relieved cold drawn wire
|
EN 10138 - 3
|
1991 - 11
|
Prestressing steels; part 3: strand
|
EN 10138 - 4
|
1991 - 11
|
Prestressing steels; part 4: hot rolled and processed bars
|
EN 10138 - 5
|
1991 - 11
|
Prestressing steels; part 5: quenched and tempered wire
|
EN 10139
|
1992 - 10
|
Cold rolled uncoated mild steel narrow strip for cold forming; technical delivery conditions
|
EN 10140
|
1992 - 10
|
Cold rolled narrow steel strip; tolerances on dimensions and shape
|
EN 10142
|
1996 - 08
|
Continously hot-dip zinc coated low carbon steel sheet and strip for cold forming; technical delivery conditions
|
EN 10143
|
1993 - 01
|
Continously hot-dip metal coated steel sheet and strip; tolerances on dimensions and shape
|
EN 10147
|
1991 - 11
|
Continously hot-dip zinc coated unalloyed structural steel sheet and strip; technical delivery conditions
|
EN 10147/A1
|
1995 - 06
|
Continously hot-dip zinc coated structural steel strip and sheet - Technical delivery conditions; Amendment A1
|
EN 10149 - 1
|
1995 - 09
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 1: General delivery conditions
|
EN 10149 - 2
|
1995 - 09
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 2: Delivery conditions for thermomechanically rolled steels
|
EN 10149 - 3
|
1995 - 09
|
Hot rolled flat products made of high yield strength steels for cold forming - Part 3: Delivery conditions for normalized or normalized rolled steels
|
EN 10152
|
1993 - 10
|
Electrolytically zinc coated cold rolled steel flat products; technical delivery conditions
|
EN 10154
|
1995 - 10
|
Continuously hot-dip aluminium-silicon (AS) coated steel strip and sheet - Technical delivery conditions
|
EN 10155
|
1993 - 06
|
Structural steels with improved atmospheric corrosion resistance; technical delivery conditions
|
EN 10163 - 1
|
1991 - 08
|
Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 1: general requirements
|
EN 10163 - 2
|
1991 - 08
|
Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 2: plate and wide flats
|
EN 10163 - 3
|
1991 - 08
|
Delivery requirements for surface condition of hot rolled steel plates, wide flats and sections; part 3: sections
|
EN 10163 - 4
|
1991 - 09
|
Delivery requirements for surface quality of hot rolled steel products; part 4: round bars and wire rod
|
EN 10164
|
1993 - 06
|
Steel products with improved deformation properties perpendicular of the product; technical delivery conditions
|
EN 10165
|
1995 - 12
|
Cold rolled electrical alloyed steel sheet and strip delivered in semi - processed state
|
EN 10169 - 1
|
1995 - 08
|
Continuously organic coated steel flat products - Part 1: General information (definitions, materials, tolerances, test methods )
|
EN 10169 - 2
|
1995 - 10
|
Continuously organic coated (coil coated) steel flat products - Part 2: Products for building exterior applications
|
EN 10173
|
1987 - 03
|
Double cold reduced electrolytic chromium/chromium oxide coated steel; coil for subsequent cutting into sheets
|
EN 10202
|
1996 - 08
|
Cold reduced electrolytic chromium/chromium oxide coated steel
|
EN 10203
|
1991 - 08
|
Cold reduced electrolytic tinplate
|
EN 10204
|
1996 - 01
|
Metallic products; types of inspection documents
|
EN 10204/A1
|
1996 - 01
|
Metallic products-Types of inspection documents; Amendment A1
|
EN 10205
|
1991 - 11
|
Cold reduced blackplate in coil form for the production of tinplate or electrolytic chromium/chromium oxide coated steel
|
EN 10207
|
1991 - 11
|
Steels for simple pressure vessels; technical delivery requirements for plates, strips and bars
|
EN 10208 - 1
|
1992 - 11
|
Steel pipes for pipe lines for combustible fluids; technical delivery conditions; part 1: pipes of requirement class A
|
EN 10208 - 2
|
1996 - 09
|
Steel pipes for pipe lines for combustible fluids; technical delivery conditions; part 2: pipes of requirement class B
|
EN 10209
|
1996 - 10
|
Cold rolled low carbon steel flat products for vitreous enamelling - Technical delivery conditions
|
EN 10210 - 1
|
1994 - 03
|
Hot finished structural hollow sections of non - alloy and fine grain structural steels; part 1: technical delivery requirements
|
EN 10210 - 2
|
1992 - 09
|
Hot finished structural hollow sections of non - alloy and fine grain structural steels; part 2: tolerances, dimension and sectional properties
|
EN 10213 - 1
|
1995 - 12
|
Technical delivery conditions for steel castings for pressure purposes - Part 1: General
|
EN 10213 - 2
|
1995 - 12
|
Technical delivery conditions for steel castings for pressure purposes - Part 2: Steel grades for use at room temperature and elevated temperatures
|
EN 10213 - 3
|
1995 - 12
|
Technical delivery conditions for steel castings for pressure purposes - Part 3: Steel grades for use at low temperatures
|
EN 10213 - 4
|
1995 - 12
|
Technical delivery conditions for steel castings for pressure purposes - Part 4: Austenitic and austenitic - ferritic steel grades
|
EN 10214
|
1995 - 02
|
Continuously hot-dip zinc-aluminium (ZA) coated steel strip and sheet - Technical delivery conditions
|
EN 10215
|
1995 - 02
|
Continuously hot-dip aluminium-zinc (AZ) coated steel strip and sheet - Technical delivery conditions
|
EN 10216-1
|
1995 - 11
|
Seamless steel tubes for pressure purposes; technical delivery conditions; part 1: non-alloy steel with specified room temperature properties
|
EN 10217 - 1
|
1991 - 02
|
Welded steel tubes for pressure purposes; technical delivery conditions; part 1: non -alloy steel with specified room temperature properties
|
EN 10218 - 1EN 10218 - 2
|
1994 - 031995 - 11
|
Steel wire and wire products; general; part 1: test methodsSteel wire and wire products; general; part 2: wire dimensions and tolerances
|
EN 10219 - 1
|
1992 - 09
|
Cold formed structural hollow sections of non-alloy and fine grain structural steels; part 1: technical delivery requirements
|
EN 10219 - 2
|
1992 - 09
|
Cold formed structural hollow sections of non-alloy and fine grain structural steels; part 2: tolerances, dimensions and sectional properties
|
ENV 10220
|
1993 - 11
|
Seamless and welded steel tubes; dimensions and masses per unit length
|
EN 10221
|
1995 - 11
|
Surface quality classes for hot-rolled bars and rods - Technical delivery conditions
|
EN 10222 - 1
|
1994 - 06
|
Steel forgings for pressure purposes - Part 1: General requirements for open die forgings
|
EN 10222 - 3
|
1994 - 06
|
Steel forgings for pressure purposes - Part 3: Ferritic and martensitic steels with elevated temperature properties
|
EN 10222 - 4
|
1994 - 06
|
Steel forgings for pressure purposes - Part 4: Nickel steels with specified low temperature properties
|
EN 10222 - 5
|
1994 - 06
|
Steel forgings for pressure purposes - Part 5: Fine grain steels with high proof stress
|
EN 10222 - 6
|
1994 - 06
|
Steel forgings for pressure purposes - Part 6: Austenitic, martensitic and austenitic-ferritic stainless steels
|
EN 10223 - 1
|
1993 - 02
|
Steel wire and wire products for fences; part 1: zinc and zinc-alloy coated steel barbed wire
|
EN 10223 - 2
|
1993 - 04
|
Steel wire and wire products for fences; part 2: hexagonal steel wire netting for agricultural, insulation, and fencing purposes
|
EN 10223 - 3
|
1993 - 04
|
Steel wire and wire products for fences; part 3: hexagonal steel wire netting for engineering purposes
|
EN 10223 - 4
|
1994 -10
|
Steel wire and wire products for fences - Part 4: Steel wire welded mesh fencing
|
EN 10223 - 5
|
1994 -10
|
Steel wire and wire products for fences - Part 5: Steel wire woven hinged joint and knotted joint stock fencing
|
EN 10223 - 6
|
1994 -10
|
Steel wire and wire products for fences - Part 6: Steel wire chain link fencing
|
EN 10224
|
1995 - 05
|
Steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption
|
EN 10225
|
1994 - 10
|
Weldable structural steels for fixed offshore structures
|
EN 10226 - 1
|
1995 -11
|
Pipe threads where pressure tight joints are made on the threads - Part 1: Designation, dimensions and tolerances
|
EN 10229
|
1995 - 08
|
Evaluation of resistance of steel products to hydrogen induced cracking (HIC)
|
EN 10230
|
1993 - 02
|
Steel wire and wire products; common, special and loose feed stock steel wire machine nails
|
EN 10238
|
1995 - 12
|
Automatically blast cleaned and primed steel products
|
EN 10240
|
1994 - 06
|
Internal and/or external protective coatings for steel tubes - Specification for hot dip galvanized coatings
|
EN 10241
|
1994 - 06
|
Threaded steel fittings
|
EN 10242
|
1994 - 11
|
Threaded pipe fitting in malleable cast iron
|
EN 10243 - 1
|
1995 - 08
|
Steel drop and press forgings - Tolerances on dimensions
|
EN 10243 - 2
|
1995 - 08
|
Steel upset forgings made on horizontal forging machines -Tolerances on dimensions
|
EN 10244 - 1
|
1995 - 01
|
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 1: General principles
|
EN 10244 - 2
|
1995 - 01
|
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings on steel wire
|
EN 10244 - 3
|
1995 - 01
|
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 3: Aluminium coatings
|
EN 10244 - 4
|
1995 - 01
|
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 4: Tin coatings
|
EN 10244 - 5
|
1995 - 01
|
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 5: Nickel coatings
|
EN 10244 - 6
|
1995 - 01
|
Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 6: Copper, bronze or brass coatings
|
EN 10245 - 1
|
1995 - 01
|
Steel wire and wire products - Organic coatings on wire -Part 1: General rules
|
EN 10245 - 2
|
1995 - 01
|
Steel wire and wire products - Organic coatings on wire -Part 2: PVC coated wire
|
EN 10245 - 3
|
1995 - 01
|
Steel wire and wire products - Organic coatings on wire -Part 3: PE coated wire
|
EN 10248 - 1
|
1995 - 06
|
Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditions
|
EN 10248 - 2
|
1995 - 06
|
Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
|
EN 10249 - 1
|
1995 - 06
|
Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditions
|
EN 10249 - 2
|
1995 - 06
|
Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensions
|
EN 10253 - 1
|
1994 - 01
|
Butt; welding pipe fittings wrought carbon steel without specific inspection requirements
|
EN 10254
|
1995 - 08
|
Steel closed die forgings - General technical delivery conditions
|
EN 10255
|
1996 - 01
|
Non-alloy steel tubes suitable for welding or threading
|
EN 10257 - 1
|
1994 - 11
|
Zinc or zinc alloy coated low carbon steel wire for armouring cables - Part 1: Land cables
|
EN 10257 - 2
|
1994 - 11
|
Zinc or zinc alloy coated low carbon steel wire for armouring cables - Part 2: Submarine cables
|
EN 10267
|
1995 - 08
|
Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures
|
EN 10268
|
1995 - 10
|
Cold-rolled flat products made of high field strength steels for cold forming - General delivery conditions
|
EN 10271
|
1996 - 03
|
Electrolyticaly zinc-nickel (ZN) coated cold roled steel flat products - Tehnical delvery conditions
|
EN 10283
|
1996 - 04
|
Corrosion resistant steel casting
|
EN 10284
|
1996 - 04
|
Malleable cast iron fittings with commresion ends for plastics piping system
|
EN 10285
|
1996 - 12
|
Steel tubes and fittings for on and offshore pipelines - External three layer extruded polyethylene based coating
|
EN 10286
|
1996 - 12
|
Steel tubes and fittings for on and offshore pipelines - External three layer extruded polypropylene based coatings
|
EN 10287
|
1996 - 12
|
Steel tubes and fittings for on and offshore pipelines - External fused polyethylene based coatings
|
EN 10288
|
1997 - 01
|
Steel tubes and fittings for on and offshore pipelines - External two layer extruded polyethylene based coatings
|
EN 20049 - 01
|
1991 - 12
|
Melleable cast iron threaded pipe fittings; part 1: fittings with parallel internal and taper external threads in accordance with ISO 7-1
|
EN 29658
|
1991 - 12
|
Steel; determination of aluminium content; flame atomic absorption spectrometric method (ISO 9658 :1990)
|
EN ISO 945
|
1994 - 07
|
Cast iron - Designation of microstructure of graphite (ISO 945 : 1975)
|
EN ISO 1127
|
1995 - 10
|
Stainless steel tubes - Dimensions, tolerances and conventional masses per unit length
|
EN ISO 3785
|
1995 - 01
|
Steel - Designation of test piece axes (ISO 3785 : 1976)
|
EN ISO 8434 - 1
|
1995 - 05
|
Metallic tube
connections for fluid power and general use - Part 1: 24 < Grad > compression fittings (ISO 8434-1:1994)
|
EN ISO 10380
|
1995 - 05
|
Corrugated flexible metallic hose and hose assemblies (ISO 10380 : 1994)
|